Specifi Cations; Rf Exposure - Cisco DPH153 User Manual

Specifi cations

Power Supply
Input: AC 100V-240V, 50-60 Hz; Output: DC 12V 1.25A. Interchangeable PIN (UL, VDE)
Status Indicators
Four Lights: Power (Green, Red); Location (Green); Ethernet (Green); 3G (Green, Red)
Dimensions
210 x 180 x 60 mm (HxLxW)
Unit Weight
Unit: 476.27 grams (1lb 0.8oz); Box: 955.37 g (2lb 1.7oz)
Ambient Temperature Range
0-40C

RF Exposure

NOTE: This transmitter must not be collocated or operated in conjunction with any other
antenna or transmitter. This equipment should be installed and operated with a minimum
distance of 7.9 inches (20 cm) between the radiator and your body.
United States
This equipment complies with FCC RF exposure limits set forth for an uncontrolled environment.
This system has been evaluated for RF exposure for humans in reference to ANSI C 95.1
(American National Standards Institute) limits. The evaluation was based on evaluation per
ANI C 95.1 and FCC OET Bulletin 65C rev 01.01. The minimum separation distance from the
antenna/radiator to a general bystander is 7.9 inches (20 cm) to maintain compliance.
This transmitter must not be collocated or operating in conjunction with any other antenna
or transmitter.
The availability of some specifi c channels and/or operational frequency bands are
country dependent and are fi rmware programmed at the factory to match the intended
destination. The fi rmware setting is not accessible by the end user.
Canada
This equipment complies with IC RF exposure limits set forth for an uncontrolled
environment. This system has been evaluated for RF exposure for humans in reference to
Canada Health Code 6 (2009) limits. The evaluation was based on evaluation per RSS-
102 Rev 4. The minimum separation distance from the antenna to general bystander is
7.9 inches (20 cm) to maintain compliance.
8