Further Configuration Of Ons 15305 - Cisco ONS 15305 Quick Installation Manual

Erase a Community String
To remove a community string, use the following command:
Step 1 Enter the following command at the prompt:
ONSCLI>Community-Handler\remove manager=0.0.0.0 community=public
Step 2 Press Enter. The following data appears:
MANAGER: 0.0.0.0
COMMUNITY: public
removed.
13

Further Configuration of ONS 15305

Please see CiscoEdge Craft Software Guide for instructions related to further configuration and
ONS 15305 Installation and Operations Guide for details concerning the equipment.
Tip See the Commissioning Wizard and the MCN Wizard in CiscoEdge Craft.
Recommended Order
1. Configure expected modules.
2. Enable alarm reporting on all modules including the power module(s).
3. Adjust time and date and optionally the time server.
4. Add a community string reflecting the IP address of your CiscoEdge Craft PC.
5. If your configuration includes SDH interfaces, enable all in use.
6. Configure synchronization as planned.
7. Configure DCN if not including signals through IP payload.
8. If your configuration includes SDH interfaces, structure the VC's as desirable.
9. If your configuration includes Ethernet into SDH, configure administratively the desired
bandwidth for WAN port(s).
10. If your configuration includes PDH, interfaces enable and configure desirable port(s).
11. If your configuration includes Ethernet, consider the following; operation of each Ethernet port,
IP-routing, STP, etc..
33