Step 4
Press Enter.
System Mode—IP Unnumbered
Step 1
Enter the following command at the prompt:
ONSCLI> Management-modes\sys sys=ipun
Change management configuration, are you sure? (y/n)?
Step 2
Press y.
Step 3
Assign an IP address. If system mode is IP unnumbered, use the following command:
ONSCLI>Device\Management-Configuration\IP-Configuration
IP-ADDRESS=193.69.136.104, SUBNET-MASK=255.255.255.0
For most commands, if no parameters are supplied, then all of the current parameter values are
displayed.
ONSCLI>IP-Configuration
IP-ADDRESS: 10.0.0.1
SUBNET-MASK: 255.255.255.0
DEFAULT-GATEWAY: 10.0.0.254 (optional)
Change Passwords
Step 1
Enter the following command at the prompt:
ONSCLI>ch ?
Step 2
Press Enter. The following data appears:
Usage:
Change-Passwords
[ONSCLI -PASSWORD=<string[6:12]>]
[TELNET-PASSWORD=<string[6:12]>]
By this command, TELNET and ONSCLI passwords can be changed. Both passwords can be changed
in the same command or they can be changed one by one.
32