Cisco ONS 15305 Quick Installation Manual page 27

Exit
The Exit command is used to terminate an ONSCLI session. The ONSCLI session is automatically
terminated after a period of 30 minutes of inactivity. ONSCLI does not accept simultaneous sessions.
Syntax Rules
An ONSCLI command line begins with a prompt (issued by ONSCLI), which serves to indicate the
current position in the command hierarchy.
An ONSCLI command is issued by typing the command and then pressing Enter. Optionally, and only
at the lowest level in the command hierarchy, one or more parameters might be supplied. These are
identified by keywords. The command name, parameter keywords, and parameter values are delimited
by one or more spaces.
Note Only sufficient leading characters of the command name must be typed to avoid ambiguity.
The same applies to keywords.
Table 3 Command Line Editing Features
Command Result
Delete or Erases characters in the command line.
Backspace
Arrow left Moves the cursor to the left side.
Arrow right Moves the cursor to the right side.
Arrow Up Recalls the previous command in command history.
Return or At the command line, pressing the Return key performs the function of processing a
Enter command.
.. Returns to the previous command level.
\ Goes to the top command level.
? Issues a list of commands valid at the current level, or shows the command usage.
Free Shows VC-12 containers that are not yet utilized.
Used Lists VC-12 containers that are in use.
Status Presents current device and port status.
Exit Exits ONSCLI.
27