Cisco ONS 15305 Quick Installation Manual page 26

>ONSCLI
--------------------------------------------------
ONS 15305 Command Line Interface
--------------------------------------------------
Enter ONSCLI password: ******
ONSCLI>
Step 7 When access has been granted, you can define the following parameters:
IP-Configuration(Management-Port):
Show-Current-Alarms:
Change-Passwords: Manage CLI/TELNET passwords
Erase-CDB:
Reset-Device:
Display-Event-Log:
Clear-Event-Log:
Community-Handler:
Management-Modes:
Running-Config:
Exit:
It is sufficient to type leading characters of the command name to avoid ambiguity—the same
applies to keywords.
Note The management port IP address is a compulsory parameter, and must be specified by you. All
the other parameters (except default gateway) are defaulted to pre-defined values if they are
not specified.
Note The backspace or delete key can be used to edit the command line. Commands and keywords
are not case-sensitive.
Incorrect Password
Each password characters is echoed as '*'. An incorrect password is rejected with the message:
invalid password
and the password prompt is reissued.
An authorized ONSCLI user obtains full access rights to the available management information.
26