Supported Cisco Antennas And Cables - Cisco IR829 Hardware Installation Manual

Antennas
MIMO ports on 5-in-1 and 2-in-1
Cellular and WLAN ports on the 5-in-1 and 2-in-1 antennas support MIMO technology. MIMO brings
significant improvements in throughput and robustness of the wireless link in fading channels. Users
choosing to connect only one wireless port on MIMO capable products are giving up significant wireless
performance in both throughput and robustness of the link.
•
•
The following section shows some examples of different installation scenarios.

Supported Cisco Antennas and Cables

Table 1-4
Table 1-4 4G/LTE Radio Modules/Cables/Antennas
Use Case Radio Module
4G/LTE Case 1: IR829GW-LTE
-GA-EK9
1' 2', 5', 10', 15' or 20'
cable to mast mounted IR829GW-LTE
antenna, Stick Omni -GA-ZK9
or Directional Flat
IR829GW-LTE
Panel antenna
-NA-AK9
IR829GW-LTE
-VZ-AK9
2x TNC(f)
4G/LTE Case 2: IR829GW-LTE
-GA-EK9
IR829GW-LTE
-GA-ZK9
IR829GW-LTE
-NA-AK9
IR829GW-LTE
-VZ-AK9
2x TNC(f)
Cisco IR829 Integrated Services Router Hardware Installation Guide
1-10
The individual 4G antenna cables on the 5-in-1 antenna can be connected to either cellular port of
IR829. There is no one-to-one assignment requirement.
The individual WLAN antenna cables on the 5-in-1 antenna and the 2-in-1 antenna can be connected
to any WLAN port of IR829. There is no one to one assignment requirement.
lists the supported 4G/LTE Radio Modules/Cables/Antennas for Cisco IR829.
Indoor Cable
None
Router located in
outdoor protective
enclosure
R/A-TNC(m) to
N(m),
LMR-240-FR/CMR,
2', qty 2
37-100707-01
•
Not
Note
available
from Cisco
Lightning
Arrestor or
Adapter Outdoor Cable
None RA-TNC(m) to
N(m),
LMR-400-DB,
20', qty 2
37-1378-01
•
• "CAB-L400-2
0-TNC-N
Chapter 1 Product Overview
Antenna
2x 4G Omni Stick,
Standard Perf, 10"
2dBi, 1x N(f) each
• 07-1171-01
• ANT-4G-OMNI-O
UT-N
1x 4G Panel Antenna,
2x N(f) each
07-1172-01
•
• ANT-4G-PNL-OUT
-N
1x 4G Panel Antenna,
2x N(f) each
07-1172-01
•
• ANT-4G-PNL-OUT
-N