Modem Support; Supported Cisco Antennas And Cables; 4G/Lte Radio Cables/Antennas; Lte Radio Cables/Antennas Use Case 1 - Cisco IR829 Hardware Installation Manual

Product Overview

Supported Cisco Antennas and Cables

The following section shows some examples of different installation scenarios.

Modem Support

The Cisco IR800 series Industrial routers use the MC73XX and MC74XX series modems. The software download page can be found here:
https://software.cisco.com/download/navigator.html?mdfid=286288566&flowid=76082
NOTE: Be sure to select the correct firmware download for your carrier.
The Cisco Firmware Upgrade Guide for Cellular Modems can be found here:
http://www.cisco.com/c/en/us/td/docs/routers/access/interfaces/firmware/Firmware_Upgrade.html
Previous versions of this guide contained additional configuration information which has now been relocated to the
Services Router Software Configuration Guide.
Supported Cisco Antennas and Cables

4G/LTE Radio Cables/Antennas

4G/LTE Radio Cables/Antennas Use Case 1
Table 5 4G/LTE Radio Cables/Antennas Use Case 1
Item
Antenna Arrangement
Internal Cable
Adapter and/or
Lightning Arrestor
External Cable
Antenna
Description
1' 2', 5', 10', 15' or 20' cable to mast mounted antenna, Stick Omni or Directional Flat Panel antenna
None, router located in outdoor protective enclosure
None
RA-TNC(m) to N(m), LMR-400-DB, 20', qty 2
 "CAB-L400-20-TNC-N
2x 4G Omni Stick, Standard Perf, 10" 2dBi, 1x N(f) each
 ANT-4G-OMNI-OUT-N
1x 4G Panel Antenna, 2x N(f) each
 ANT-4G-PNL-OUT-N
22
Cisco IR800 Integrated