Dialog Copy/Exchange Channel - ABB SA/S 12.16.6.1 Product Manual

®
ABB i-bus KNX
3.1.2.2 Dialog Copy/exchange
channel
52 2CDC 505 056 D0207 | SA/S
Commissioning
You can see general product information in the upper area of the window.
Below it you will find a selection window for the source channel in order to
mark the source channel. Beside is located the selection window for the
target channel or channels for marking the target channel or channels.
Source channel
With the selection of the source channel, you define which parameter
settings should be copied or exchanged. Only one source channel can be
selected at a time.