Output Lamp Load At 230 V Ac - ABB SA/S 12.16.6.1 Product Manual

®
ABB i-bus KNX
2.1.2 Output lamp load
at 230 V AC
Lamps
Fluorescent lamps T5 / T8
Low-voltage halogen lamps
Dulux lamp
Mercury-vapour lamp
Switching performance (switching
contact)
Number of electronic ballasts (T5/T8,
1)
single element)
1)
For multiple element lamps or other types, the number of electronic ballasts must be determined using the peak inrush current of the electronic ballasts,
see Ballast calculation, page 35.
Device type
SA/S 4.6.1
SA/S 8.6.1
SA/S 12.6.1
* ... = current version number of the application program
Device technology
Incandescent lamp load
Uncorrected
Parallel compensated
DUO circuit
Inductive transformer
Electronic transformer
Halogen lamps 230 V
Uncorrected
Parallel compensated
Uncorrected
Parallel compensated
Maximum peak inrush-current I
Maximum peak inrush-current I
Maximum peak inrush-current I
18 W (ABB EVG 1 x 18 SF)
24 W (ABB EVG-T5 1 x 24 CY)
36 W (ABB EVG 1 x 36 CF)
58 W (ABB EVG 1 x 58 CF)
80 W (Helvar EL 1 x 80 SC)
Application program Maximum number of
communication objects
64
Switch 4f 6A/...*
124
Switch 8f 6A/...*
184
Switch 12f 6A/...*
Note
The ETS and the current version of the device application program are
required for programming.
The current version of the application program is available for download
on the Internet at www.abb.com/knx. After import it is available in the ETS
under ABB/Output/Binary output xf 6A/...* (x = 4, 8 or 12).
The device does not support the closing function of a KNX device in the
ETS. If you inhibit access to all devices of the project with a BCU code, it
has no effect on this device. Data can still be read and programmed.
1200 W
800 W
300 W
350 W
800 W
1000 W
1000 W
800 W
800 W
1000 W
800 W
(150 μs) 200 A
p
(250 μs) 160 A
p
(600 μs)
100 A
p
10
10
7
5
3
Maximum number of
group addresses
254
254
254
Maximum number of
associations
254
254
254
SA/S | 2CDC 505 056 D0207 9