Switching On And Off Delay - ABB SA/S 12.16.6.1 Product Manual

®
ABB i-bus KNX
4.2.2.2 Switching ON and OFF
delay
Planning and application
The switching ON and OFF delay delays switch on or switch off of the
output.
Example 1:
Output ON
OFF
Communication
object Switch
Example 2:
Output ON
OFF
Communication
object Switch
The delay time T or T
D1 D0
timed out, the output executes the switch telegram.
If a new ON telegram with the value 1 is received during the switch on delay,
the time of the switch on delay starts again. The same applies to switch off
for the switch off delay. If a new OFF telegram with the value 0 is received
during the switch off delay, the time of the switch off delay starts again.
Note
If the device receives an OFF telegram during the switch on delay T
ON telegram is disregarded.
T
D1
T
D1
1 1
T
D1
T
D1
1 0 1
starts after a switch telegram, and after it has
T
D0
0
T
D0
T
D0
0 0
, an
D1
SA/S | 2CDC 505 056 D0207 143