Flashing - ABB SA/S 12.16.6.1 Product Manual

®
ABB i-bus KNX
4.2.2.3

Flashing

144 2CDC 505 056 D0207 | SA/S
Planning and application
The output can flash when the output is switched on and off periodically.
Output
ON
T
ON
OFF
Communication
object Switch
1
The switch on time (T
ON
programmed.
Note
The contact life of the contacts should be considered and can be found in
the technical data. A limitation of the number of switching operations with
the parameter Number of impulses may be useful.
Furthermore, a delay in the switching sequence is possible caused by the
limited availability of switching energy with very frequent switching.
The possible number of switching operations should be considered.
T
OFF
) and switch off time (T
OFF
0
) during flashing can be