Honeywell Dolphin 75e User Manual page 72

Preliminary Draft, Not for Release - Please Review 2-3-2015
8. Touch the reduced screen image. The terminal automatically initiates a Bluetooth pairing. Once pairing is complete,
the file is sent.
The file image and saved location are displayed on the receiving terminal screen when the transfer is successful.
By default, the file is saved to the root Honeywell/nfcbtdemo folder of the microSD card.
9. Select the Back button
Note: The NFC Bluetooth demo automatically disables Bluetooth technology when the demo is closed.
NFC Beam Demo
NFC Beam Demo demonstrates how a file can be transmitted between two devices using the Android beam.
Note: The NFC Bluetooth Demo is for use with Dolphin 75e terminals only.
1. Verify NFC technology is enabled on both terminals.
2. Verify Android beam is enabled on the terminal sending the file.
3. Touch NFC Beam Demo
4. Check the box next to the test.txt file.
5. Hold the terminals back to back. The sending terminal emits a sound, the demo screen image shrinks, and the mes-
sage, "Touch to beam" displays.
Note: Both terminals must be unlocked for NFC detection. If sound is muted, the terminal vibrates when an NFC tag is
detected.
6. Touch the reduced screen image to initiate file transfer.
A "File received" message is displayed on the receiving terminal when the transfer is successful. By default, the file
is saved to the root Honeywell/nfcbeamdemo folder of the microSD card.
7. Select the Back button
8 - 6
to exit the demo.
from inside the NFC Demos
to exit the demo.
app on the sending terminal.