Airplane Mode; Replacing The Battery - Honeywell Dolphin 75e User Manual

Preliminary Draft, Not for Release - Please Review 2-3-2015
2. Drag the to the right or press the Menu button
To adjust the timeout limit, touch All Apps

Airplane Mode

Turn On Airplane mode to disable all the terminal radios that transmit voice or data.
1. Press and hold the Power button
2. Touch Airplane Mode to toggle the mode on or off. When Airplane Mode is turned on,
Note: If the Show System Dialog setting is turned off (see page 6-1), the Options menu does not display when you press and
hold the Power button. The terminal automatically reboots when Power button is held for approximately 8 seconds.
To enable Airplane mode when the Show System Dialog setting is off: touch
& Networks" heading, select More. Check the box next to Airplane Mode.

Replacing the Battery

Before replacing the battery, read the
For battery replacement part numbers, see
RISK OF EXPLOSION IF BATTERY IS REPLACED BY AN INCORRECT TYPE. The battery should be disposed of
by a qualified re-cycler or hazardous materials handler. Do not incinerate the battery or dispose of the battery with
general waste materials.
Ensure all components are dry prior to mating terminals/batteries with peripheral devices. Mating wet components
may cause damage not covered by the warranty.
We recommend use of Honeywell Li-ion battery packs. Use of any non-Honeywell battery may result in damage not
covered by the warranty.
The following illustrations depict a standard battery with a standard battery door; however, battery removal and installation
procedures are the same for the extended battery and extended battery door.
To replace the battery:
1. Power Off the terminal.
2. Unlock and remove the battery door.
Battery Door Lock
2 - 10
to unlock the terminal.
> Settings > Display > Sleep.
until the Options menu displays.
Guidelines for Battery Pack Use and Disposal
Replacement Battery Specifications
shows on the status bar.
> Settings . Under the "Wireless
on page 3-11.
on page 3-8.