HIKVISION DS-1000KI User Manual

Network

Hide thumbs

Table Of Contents

Table of Contents

Quick Links

DS-1000KI Network Keyboard

User Manual

(Version 1.2.2)

Table of Contents

Summary of Contents for HIKVISION DS-1000KI

Page 1 DS-1000KI Network Keyboard User Manual (Version 1.2.2)
Page 2 DS-1000KI Keyboard User Manual Thanks a lot for purchasing our product. If there is any question, please feel free to contact us. This manual may have something inaccurate in technology, unsuited with the product’s functions and operations or the misprints. The manual’s contents will be changed with the enhanced functions of the product, as well as give the regular advance or renew the product and procedure in this manual.
Page 3: Table Of Contents
DS-1000KI Keyboard User Manual Index Chapter1 Features of DS-1000KI ............. 3 Main Features ......................... 3 Sketch of DS-1000KI ..................... 5 Rear Board Description ....................7 Keyboard Connection ..................... 8 Chapter2 Keyboard Operation ............9 Enter into keyboard system ..................... 9 Keyboard Configuration ....................
Page 4: Chapter1 Features Of Ds-1000Ki
【ID】 and input the correct user ID, you can login and operate the corresponding DVR.  DS-1000KI network keyboard is equipped with the joystick. You can use it to control PTZ easily.  DS-1000KI network keyboard could receive the alarm information of DVR.
Page 5 10 DVR at most.  DS-1000KI network keyboard has four alarm outputs and can set up or clear the alarm output by operating the alarm handling in the controlling menu. Note: If you use DS-1000KI network keyboard to control DS-8000 series DVR, the firmware of DVR must be version1.4 above.
Page 6: Sketch Of Ds-1000Ki
DS-1000KI Keyboard User Manual Sketch of DS-1000KI Fig 1.1.1 1------ Menu area: Show the keyboard menu; 2------【Menu】: Menu key. Press it more than 2 seconds, the menu area will display the keyboard menu, otherwise the menu area will display the controlling menu;...
Page 7 DS-1000KI Keyboard User Manual 18----【Shot】: The key to adjust the PTZ preset. 19----【Freeze】: Reserved. 20----【▲】: Page Up key in the information display area. When you input IP address, you can use it as delete key. 21----【▼】: Page Down key in the information area. When you input IP address, you can use it as space key.
Page 8: Rear Board Description
DS-1000KI Keyboard User Manual Rear Board Description Fig 1.2.1 1------ Dial Switches. The factory default values are “on on off off off off off off (11000000)”. From the picture we can see the dial switch consists of 8 sub-switches. Now the function of each sub-switch is following: ...
Page 9: Keyboard Connection
4 cables are the anode and cathode line for receiving, 7 is the shared grounding line: You can connect DS-1000KI Port A R+ R- pins with DVR keyboard interface Pin3 and Pin4, shown as following: T+ (Pin1) T- (Pin2)
Page 10: Chapter2 Keyboard Operation
DS-1000KI Keyboard User Manual Chapter2 Keyboard Operation Enter into keyboard system When DS-1000KI network keyboard is in power, the menu screen will show the following information: Fig 2.1.1 When “Password” appears on the information screen, input the password (The default administrator password of DS-1000KI keyboard is 111 and the common password is 222) and enter into the system operation by pressing the key【Enter】, as...
Page 11 DS-1000KI Keyboard User Manual Fig 2.1.2 Note: DS-1000KI keyboard can control DVR by either network mode or RS485 bus mode. Here we just describe the usage of network mode. It is the same for RS485 bus mode. Copyright 2005. All rights reserved.
Page 12: Keyboard Configuration
DS-1000KI Keyboard User Manual Keyboard Configuration Before controlling DVR, you should first configure DS-1000KI net keyboard including system configuration, user configuration and defense configuration. Press the key 【Menu】 for more than 2 seconds, you will enter into the keyboard configuration (the administrator password is needed to login), as shown in Fig 2.1.1...
Page 13  KBD ID: Keyboard number. Input the keyboard number with the numeral keys and press【Enter】to confirm it as shown in Fig 2.2.3-2  MaskIP: The sub net IP of DS-1000KI network keyboard. The default factory value is 255.255.255.0. Press 【2】 to confirm it. Press 【1】 to modify it and press 【Enter】to confirm the new mask IP as shown in Fig 2.2.3-3...
Page 15: User Configuration
Fig 2.2.4 User Configuration  New User For example, if you want to control DVR with IP address of 192.0.1.99 by DS-1000KI network keyboard. First, you should create one new user. Choose “New” item in the user configuration menu, you will enter into new user input menu as shown in Fig 2.2.5.
Page 16 DS-1000KI Keyboard User Manual Fig 2.2.5 Input Methods of DS-1000KI For example, here I input “01” as the user name and press【Enter】to confirm it as shown in Fig 2.2.6-1. Fig 2.2.6 Then, choose the device type (“1.DVR” as shown in Fig 2.2.6-2), press【1】to Copyright 2005.
Page 17 DS-1000KI Keyboard User Manual choose “DVR” and input the user name, password of the DVR. The keyboard must use this username and password to login the DVR. For example, the default user name of DVR 192.0.1.99 is “admin” and the default password of the DVR is “12345”. Here we also input the same username and password as shown in Fig 2.2.6-3, 2.2.6-4.
Page 18 DS-1000KI Keyboard User Manual If there is no need to revise, press 【 2】 to confirm it and enter the next operation as shown in Fig 2.2.9. Fig 2.2.9 Modify Device Username 4. Modify Device Password: See Fig 2.2.10. Fig 2.2.10 Modify Device Password 5.
Page 19 DS-1000KI Keyboard User Manual Fig 2.2.13 Modify Device Port 8. Save modification: Press 【1】to save the revise of user “01” as shown in Fig 2.2.14. Fig 2.2.14 Save Revised Configuration  Delete User Input the user name to be deleted according to the indication, press【Enter】to confirm it, press【1】to delete or press【2】to exit.
Page 20 DS-1000KI Keyboard User Manual suggestion of “Not Existing User”. Fig 2.2.16 Query User Information  Delete all If we need to delete all the users, press “DelAll” item and press【1】to confirm it so that all the built users will be deleted. Press【2】to exit and return to the previous menu.
Page 21: Defense Configuration
DS-1000KI Keyboard User Manual 2.2.3 Defense Configuration Choose “ArmCfg” item, if there is no defense setting, the information display area will be shown as Fig 2.2.18-1. Press 【 1】 to defense or press 【 2】 to exit and enter into the next user.
Page 22 Fig 2.2.20, if you choose “Arm” item, then DS-1000KI keyboard will listen and receive alarm information from DVR. Please note in the DVR menu, enable the “Upload to center” option so that DVR will send alarm information to the keyboard.
Page 23: Control Dvr
DS-1000KI Keyboard User Manual Control DVR After finishing the user configuration, we can choose the user name to control the relevant DVR. Please note, at one time you can only select DVR front panel or keyboard to control DVR. 2.3.1 Login DVR 【ID】button, you will enter into the following menu.
Page 24 DS-1000KI Keyboard User Manual Fig 2.3.2 Login DVR After you input the user and login the corresponding DVR, in the network mode, keyboard will display the DVR IP address while in the RS485 bus mode, will display DVR ID number.
Page 25: Dvr Configuration
DS-1000KI Keyboard User Manual 2.3.2 DVR Configuration Choose “DVRCfg” item and show the information as in Fig 2.3.3 Fig 2.3.3 DVR Configuration Menu The items in the keyboard controlling menu are the same as those of DVR local front panel. We could see the menu below on the menu screen and describe them respectively below: 【Prev.】: Return to the previous menu of the keyboard.
Page 26: Video Playback
DS-1000KI Keyboard User Manual 2.3.2 Video playback Choose “Playback” item as shown in Fig 2.3.2 and enter into playback menu as shown in Fig 2.3.4. Fig 2.3.4 Playback Choose “Begin Time” and “End Time”, input the start and end time and press 【Enter】.
Page 28: Manual Video Recording
DS-1000KI Keyboard User Manual 2.3.3 Manual Video Recording Choose “Record” as shown in Fig 2.3.2 and display the information as shown in Fig 2.3.7. Choose the relevant items to control the manual video recording function of DVR including starting and stopping recording of one channel or all channels. Press numeral keys or【Cam】...
Page 29: Ptz Control
DS-1000KI Keyboard User Manual 2.3.4 PTZ control Choose “PTZ” as shown in Fig 2.3.2 and display the information as shown in Fig 2.3.8: Fig 2.3.8 PTZ Control Choose the above items, 【 Focus】, 【 Iris】 , 【 Zoom】, 【 Shot】 and joystick to realize PTZ control of DVR.
Page 31: Preview
DS-1000KI Keyboard User Manual 2.3.5 Preview Choose “Preview” as shown in Fig 2.3.2 and enter into the preview control menu as shown in Fig 2.3.10. Fig 2.3.10 Preview Choose the above items and realize DVR local preview shift. Select preview mode: There are 4 preview modes: 1 Screen, 4 Screen, 9 Screen and 16 Screen.
Page 32: Alarm Handling
DS-1000KI Keyboard User Manual 2.3.6 Alarm handling Choose “DealAlm” as shown in Fig2.3.2 and enter into the following alarm handling control menu: Fig 2.3.11 Alarm Handling Choose “Arm” or “Disarm” to start or stop receiving the alarm information sent from DVR. The alarm information includes view tampering alarm, motion detection alarm, video loss alarm and external sensor alarm.
Page 34: Other Information
DS-1000KI Keyboard User Manual 2.4 Other Information 2.4.1 Keyboard lock Press【】key on the keyboard, the keyboard will be locked. If you press any key, there is a message “Password” as shown in Fig 2.5.1. Input the correct password to unlock the keyboard.
Page 35: Upgrade Keyboard Firmware
DS-1000KI Keyboard User Manual Upgrade Keyboard Firmware You can upgrade DS-1000KI keyboard firmware via network. In keyboard setup menu, enter into upgrade mode, and input PC IP where keyboard firmware file is placed, keyboard will connect with PC and download firmware via network.
Page 36 DS-1000KI Keyboard User Manual Select “Users/rights” under “Security” menu item. The following dialog box will be pop-up. Create new user. Click “new user’. New user dialog pops up. Input user name “target”. Click “OK”. In the password dialog, input password “target” in “New Password” and “Verify Password”...
Page 38: Upgrade Firmware
DS-1000KI Keyboard User Manual 2.5.2 Upgrade Firmware Please make sure that DS-1000KI and PC are in the same sub net. You can use Ping command to check. Enter into keyboard system configuration menu as following: Press “Upgrade” button, input PC IP address, keyboard will connect the PC and try to download firmware file via network.
Page 39: Appendix A: Specification
DS-1000KI Keyboard User Manual Appendix A: Specification Control mode RS-485 bus mode (Port A) Network mode (UTP Port) Communication interface 1 RJ45 10M/100M UTP network port 1 RJ45 RS-232 port 2 RS-485 port (Port B is reserved) Bus work mode...
Page 40: Appendix B: Troubleshooting
DS-1000KI Keyboard User Manual Appendix B: Troubleshooting Description Possible Reasons Incorrect user name or password to login DVR Incorrect setup of DVR port number or IP Unable to login DVR address Wrong link between keyboard and DVR Broken net cable or RS485 bus...
Page 41: Appendix C: Notes
DS-1000KI Keyboard User Manual Appendix C: Notes 1) Place net keyboard in the adequately ventilated space. 2) Net keyboard shall work in the allowed temperature and humidity scope 3) Do not touch LCD screen with hard objects. 4) Do not splash water or other liquid onto the keyboard when using, to avoid short-circuit or corrosion.

HIKVISION DS-1000KI User Manual

Chapter1 Features Of DS-1000KI

Chapter2 Keyboard Operation

Appendix A: Specification

Appendix B: Troubleshooting

Appendix C: Notes

Quick Links

Related Manuals for HIKVISION DS-1000KI

Summary of Contents for HIKVISION DS-1000KI

Table of Contents