Buffalo AirStation Pro WAPS-APG600H User Manual page 8

Chapter 1 Product Overview
13
USB LED (Green)
On:
Randomly blinking: USB memory device can be removed.
14
RJ-45 serial console
port for settings
15
Reset Button
16
AOSS/WPS button Pressing this button until the 5 GHz LED / 2.4 GHz LED flashes twice
17
Maintenance port This cannot be used in the AirStation.
USB memory device is being used.
This is an RJ-45 serial console port for settings. This cannot be used in the
current firmware version.
To reset all settings, hold down this button until the Diag LED comes on
(about 3 seconds). Power must be on.
(about 1 second) will change to the AOSS or WPS connection standby
status.
- 7 -