Buffalo AirStation Pro WAPS-APG600H User Manual page 6

Chapter 1 Product Overview
3 blinks :
*2
4 blinks :
*2
5 blinks:
9 blinks :
*2
Continuously
blinking :
*1
*1 Never unplug the AC adapter while the Diag LED is blinking continuously.
*2 Turn off AirStation first, wait for a few seconds, then turn it back on.
3
5 GHz LED (Blue)
On:
Randomly blinking: 5 GHz wireless LAN is transmitting.
2 blinks:
Continuously
blinking:
Note: This LED is off when "LED Setting" is set to Off. The default setting is Off (Disable). Enable the wireless
function by referring to "Enabling the Wireless LAN Functions and Making the Encryption Settings" (page16).
4
2.4 GHz LED (Green)
On:
Randomly blinking: 2.4 GHz wireless LAN is transmitting.
2 blinks:
Continuously
blinking:
Note: This LED is off when "LED Setting" is set to Off. The default setting is Off (Disable). Enable the wireless
function by referring to "Enabling the Wireless LAN Functions and Making the Encryption Settings" (page16).
5
LAN LED (Green)
On:
Blinking:
6
Antenna Connector Screw on the included antennas here.
Wired Ethernet LAN error.
Wireless LAN error.
USB error.
System error.
Updating firmware, saving settings, or initializing settings.
5 GHz wireless LAN is enabled.
AirStation is waiting for an AOSS or WPS security key.
AOSS/WPS error; failed to exchange security keys.
2.4 GHz wireless LAN is enabled.
AirStation is waiting for an AOSS or WPS security key.
AOSS/WPS error; failed to exchange security keys.
An Ethernet device is connected.
An Ethernet device is communicating.
Note: The supplied antenna supports both the 2.4 GHz and 5 GHz bands.
- 5 -