Chapter 1 Product Overview
Hardware Overview
Front Panel LEDs
1
Power LED
On:
Off:
2
Diag LED (Red)
Off:
Solid red at startup
(about 2 to 3
minutes):
Blinks red twice
at startup or
immediately after
settings are saved:
Power is on.
Power is off.
This LED is off when the "LED setting" is set to Off.
This indicates the status of this unit depending on the number of blinks
per cycle.
Note: When the unit is first turned on or restarted, the Diag LED will blink for almost a
minute during boot. This is normal.
Nomal.
RAM error.
Flash ROM error.
1
2
3
4
5
6
- 4 -