Buffalo AirStation Pro WAPS-APG600H User Manual page 10

Chapter 2 Placing Your AirStation
1
Use a LAN cable to connect the PoE port of the power sourcing equipment to the LAN 1 port
of the AirStation.
Note: Be sure that the cable connecting the AirStation and power sourcing equipment is an enhanced
Category 5 or higher 4-pair cable.
2
Turn on the AirStation power.
3
Check that the Power LED is on.
If the Power LED does not turn on even after several minutes have elapsed, check that the
LAN cable is connected correctly, the AirStation power is turned on, and that the power
sourcing equipment is turned on.
- 9 -