Serialport Configuration; Xconfiguration Serialport Mode; Xconfiguration Serialport Baudrate; Xconfiguration Serialport Loginrequired - Cisco TelePresence SX20 Codec Reference Manual

Cisco TelePresence SX20 Codec

Introduction

SerialPort configuration

xConfiguration SerialPort Mode

Enable/disable the serial port (connection via USB and RS-232 adapter).
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration SerialPort Mode:
where
: Off/On
Mode
Off: Disable the serial port.
On: Enable the serial port.

xConfiguration SerialPort BaudRate

Define the baud rate (data transmission rate, bits per second) for the serial port.
Other connection parameters for the serial port are: Data bits: 8; Parity: None; Stop bits: 1; Flow
control: None.
Requires user role: ADMIN
Default value: 38400
USAGE:
xConfiguration SerialPort BaudRate:
where
: 9600/19200/38400/57600/115200
BaudRate
Set a baud rate from the baud rates listed (bps).
SX20 Codec API Reference Guide CE8.3, JANUARY 2017.
D15316.05
About the API xConfiguration xConfiguration
Mode
BaudRate
xCommand

xConfiguration SerialPort LoginRequired

Define if login shall be required when connecting to the serial port.
Requires user role: ADMIN
Default value: On
USAGE:
xConfiguration SerialPort LoginRequired:
where
: Off/On
LoginRequired
Off: The user can access the codec via the serial port without any login.
On: Login is required when connecting to the codec via the serial port.
86
API Reference Guide
xStatus Appendices
LoginRequired
Copyright © 2017 Cisco Systems, Inc. All rights reserved.