Inserting The Bobbin Case - AEG 110 User Manual

Preparing
To
Sew
Step 11

Inserting the bobbin case

Shuttle cover
Bobbin case
Latch
a: Raise the needle by turning the
hand wheel towards you.
Open the Shuttle Cover
Hold the Bobbin Case
hinged Latch .
Insert the bobbin case fully into the
shuttle race and release the latch.
Note:
When you insert the bobbin case.
You must push the bobbin case as
far as it goes, and you can hear the
"Click".
b: Make sure that the latch locates
into the notch at top of the shuttle
or race cover.
12
.
by the