Basic Sewing
Step 5
Removing the wok
Note:
Rotate the Hand Wheel
anticlockwise (toward you) to bring the
thread take up lever to its highest
position.
But incorrect the hand wheel rotating
direction will cause upper and bobbin
thread blockage under the needle
plate.
Turn anticlockwise the hand wheel to
make the calibration tails highest
sewing.
Rotate the Hand Wheel
you to bring the thread take-up lever
to its highest point.
Raise the presser foot and draw the
fabric away from you.
Step 6
Cutting the thread
Hold the threads behind the presser
foot with both hands.
Guide them through the slit in the
Thread Cutter
and press down.
18
towards
calibration tails