Removing Bobbin Case A Bobbin; Inserting Bobbin Into Bobbin Case - AEG 225/7 LCD Instruction Book

REMOVING BOBBIN CASE AND BOBBIN
1. Raise the needle to its highest position and
open shuttle race cover

INSERTING BOBBIN INTO BOBBIN CASE

1. Pull 5 cm of thread from bobbin and insert it
into bobbin case as shown.
10 cm
5 cm
Tension spring
Hinged
latch
2. Open the hinged latch of the bobbin case
and pull the bobbin case out of the machine.
3. Release the latch and the bobbin will fall out
easily.
2. Guide the end of thread into the slot.
3. Pull the thread through the slot and under
the tension spring and pull out about 10 cm
of thread.
Slot
9