Changing The Presser Foot - AEG 110 User Manual

Preparing
To
Sew
Step 4

Changing the presser foot

Important: Ensure the Power Switch
is turned off when changing the
presser foot.
Needle
Presser foot
Groove
Pin
a:To remove
Turn the Hand Wheel
to raise the Needle
position.
Raise the Presser Foot
highest position using the Presser
Foot Arm .
Press the Press Foot Holder
the back of the foot holder. the
presser foot will release.
b: To attach
Place the Presser Foot
Needle Plate and align the Pin
on the foot with the Groove
of the foot holder. Lower the foot
holder to lock the foot in place.
- Make sure the Presser foot
secure before use.
- Make sure put down the Presser
Foot Arm before start sewing.
toward you
to its highest
to its
on
on the
is
5