Inserting The Bobbin - AEG 63Z Instruction Manual

Manual for Model 63Z

Inserting the bobbin

Attention:
Turn the power switch to off ("O") before
inserting or removing the bobbin.
When inserting or removing the bobbin,
the needle must be fully raised.
Open the needle plate cover.
Insert the bobbin in the bobbin case with
the thread running in a counterclockwise
direction (arrow).
Pull the thread through the slit (A).
Held gently on top of the bobbin with a
finger.
Draw the thread at the arrow markings into
the stitch plate thread guide from (A) to
(B).
Pull the thread at the arrow markings into
the stitch plate thread guide from (B) to (C).
To cut off excess thread pull thread back
over the cutting off blade at point (C).
Close the needle plate cover.
13