Cisco Wireless Ip Phone 8821 And 8821-Ex User Guide - Cisco 8821 User Manual

Phone Setup
The battery has metal contacts that must connect to the contacts in the battery compartment. The battery also
has an arrow at the bottom and the Cisco logo at the top.
When the battery is correctly inserted, the logo and arrow are visible. The arrow points towards the connector
on the base of the phone and the logo is close to the locking catch.
The battery compartment has small tabs in the bottom corners. The battery must slide under these tabs. The
following graphic shows the batterh compartment without and with the battery correctly installed.
a) Hold the battery so that the lower edge is close to the bottom of the compartment. Make sure that the metal
contacts on the phone and battery face each other. On the battery, the Cisco logo must be near the locking
catch and the arrow must point to the base of the phone.
Caution
Do not force the battery into the compartment or you will damage the compartment and the
battery.

Cisco Wireless IP Phone 8821 and 8821-EX User Guide

Install the Phone Battery
19