Wlan Diagnostics Fields - Cisco 8821 User Manual

Perform WLAN Diagnostics

WLAN Diagnostics Fields

The following table describes the fields in the WLAN Diagnostics screen.
Field
AP name
BSSID
SSID
Frequency
Current channel
Last RSSI
Beacon interval
Capability
Basic rates
Optional rates
Supported HT MCS
Supported VHT (rx) rates
Supported VHT (tx) rates
DTIM period
Country code
Channels
Power constraint
Power limit
Cisco Wireless IP Phone 8821 and 8821-EX User Guide
92
Description
Name of the access point (AP) to which the phone is
associated
The access point radio MAC address
The Service Set Identifier (SSID) that the phone uses
The frequency that the phone uses
The channel that the phone uses
Last Received Signal Strength Indicator (RSSI) that
the phone received.
Number of time units between beacons. A time unit
is 1.024 milliseconds.
802.11 capabilities
Data rates required by the AP at which the station
must be capable of operating.
Data rates supported by the AP that are optional for
the station to operate at.
802.11n data rates
802.11ac receive data rates
802.11ac transmit data rates
Delivery Traffic Indication Map (DTIM) information
A two-digit country code. Country information might
not be displayed if the country information element
(IE) is not present in the beacon.
List of supported channels (from the country IE).
802.11h power constraint offset in dB
Dynamic Transmit Power Control (DTCP) value
advertised by the access point.
Troubleshooting