Makita DRC200 Instruction Manual page 9

Hide thumbs Also See for DRC200:
Table of Contents

Advertisement

Available languages
  • EN

Available languages

  • ENGLISH, page 1
Do not use the Robotic Cleaner in the following
locations.
This may result in malfunction.
Locations where cooking oil particles or other oil
components are suspended in the air
Locations where aerosol sprays or chemical
products are used, such as barber shops, beauty
salons, and dry cleaning shops
Dusty locations
Do not use the Robotic Cleaner in the following
locations.
This may damage floor coverings or scratch floor
surfaces.
• Locations with easily damaged floor coverings
(sheepskin, felt materials, etc.)
• Unfinished wood or marble floors
• Freshly waxed floors
Do not use the Robotic Cleaner on floor coverings
with a long pile length (7 mm or more).
This may result in damage to the floor coverings or
cause the Robotic Cleaner to malfunction.
Do not use the Robotic Cleaner on hard, uneven
floor surfaces such as concrete floors, etc.
This may result in increased brush and wheel wear.
Do not use the Robotic Cleaner if the brushes or
wheels are worn.
This may result in scratched floor surfaces.
Discontinue operation and consult the dealer where you
purchased the Robotic Cleaner.
Remove any sandy dirt adhering to the main brush,
side brushes and wheels.
Failure to observe this instruction may result in
scratched floor surfaces.
Do not vacuum up the following items.
This may scratch or clog the inside of the Robotic
Cleaner or result in malfunction.
Liquids or wet garbage
Chemicals or oils
Pet excrement
Large amounts of sand or powder
• Sharp objects (glass, blades, pins, etc.)
Large paper or vinyl garbage
Cord or string
Clean the filter after vacuuming up fine powder
(plaster, cement, chalk, etc.).
Failure to observe this instruction may result in
malfunction.
Do not use the Robotic Cleaner if the filter is
clogged or the sensors are soiled.
This may result in malfunction.
Do not oil the rotating brush or other moving parts.
This may result in plastic cracking.
SAVE THESE INSTRUCTIONS.
Battery tool use and care
1. Recharge only with the charger specified by the
manufacturer. A charger that is suitable for one
type of battery pack may create the risk of fire
when used with another battery pack.
2. Use power tools only with specifically
designated battery packs. Use of any other
battery pack may create the risk of injury or fire.
3. When (the) battery pack is not in use, keep it
away from paper clips, coins, keys, nails, screws
and other small metal objects that can make a
connection from one terminal to another.
4. Under extreme conditions, liquid may be ejected
from the battery; avoid contact. If accidental
contact occurs, flush with water.
Important safety instructions for the
battery cartridge
1. Before using the battery cartridge, read all
instructions and precautionary markings on
(1) the battery charger, (2) the battery, and (3)
product using the battery.
2. Do not disassemble the battery cartridge.
3. If operating time has become significantly
shorter than usual, stop operating immediately.
It may result in a risk of overheating, possible
burns and even an explosion.
4. If electrolyte gets into your eyes, rinse them out
with clear water and seek medical attention right
away. It may result in loss of your eyesight.
5. Do not short-circuit the battery cartridge:
(1) Do not touch the terminals with any
conductive material.
(2) Avoid storing the battery cartridge in a
container with other metal objects such as
nails, coins, etc.
(3) Do not expose the battery cartridge to water
or rain.
A battery short-circuit can cause a large current
flow, overheating, possible burns and even a
breakdown.
6. Do not store the Robotic Cleaner and battery
cartridge in any location where the temperature
may reach or exceed 50°C (122°F).
7. Do not incinerate the battery cartridge even if it
is severely damaged or is completely worn out.
The battery cartridge can explode in a fire.
8. Be careful not to drop or strike the battery
cartridge.
9. Do not use a damaged battery cartridge.
10. Follow your local regulations relating to the
disposal of battery cartridges.
SAVE THESE INSTRUCTIONS.
CAUTION: Only use genuine Makita batteries.
Using non-genuine Makita batteries, or batteries that
have been altered, may result in the battery bursting
causing fires, personal injury and damage. It will
also void the Makita warranty for the Makita tool and
charger.
9 ENGLISH

Advertisement

Table of Contents
loading

Table of Contents