Cisco CSR 1000v Series Software Configuration Manual page 303

Configuring Support for Remote Management by the Cisco Prime Network Services Controller
Command or Action
Step 5
no shutdown
Example:
Router(config-if)# no shutdown
Step 6 exit
Example:
Router(config-if)# exit
Step 7
interface virtualportgroup
virtual-port-group-number-number
Example:
Router(config)# interface virtuaportgroup 0
Step 8 ip unnumbered management-interface
Example:
Router(config-if)# ip unnumbered
gigabitethernet1
Step 9
no shutdown
Example:
Router(config-if)# no shutdown
Step 10 exit
Example:
Router(config-if)# exit
Step 11 virtual-service csr_mgmt
Example:
Router(config)# virtual-service csr_mgmt
Step 12
vnic gateway virtualportgroup
virtual-port-group-number
Example:
Router(config-virt-serv)# vnic gateway
virtualportgroup 0
Configuring the Management Interface to Support Remote Management by the Cisco Prime Network Services
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
Purpose
Enables the management interface.
Exits interface configuration mode.
Creates a virtual port group and enters virtual port group
interface configuration mode.
Enables IP processing on an interface without assigning
it an explicit IP address.
Enables the management interface.
Exits virtual port group interface mode.
Configures the csr_mgmt virtual services container and
enters virtual services configuration mode.
Creates a vNIC gateway interface for the virtual services
container and maps the vNIC gateway interface to the
virtual port group.
Controller
291