Enabling Cisco Smart Licensing - Cisco CSR 1000v Series Software Configuration Manual

Enabling Cisco Smart Licensing

Command or Action
Step 6
no destination transport-method email
Example:
Router(cfg-call-home-profile)# no destination transport-method
email
Step 7 destination address http url
Example:
Router(cfg-call-home-profile)# destination address email
https://tools.cisco.com/its/service/oddce/services/DDCEService
Enabling Cisco Smart Licensing
To enable Cisco Smart Licensing and register your device, perform the following steps:
SUMMARY STEPS
1. configure terminal
2. license smart enable
3. exit
4. reload
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
Router# configure terminal
Step 2
license smart enable
Example:
Router(config)# license smart enable
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
174
Purpose
Disables email as the transport method.
url =
https://tools.cisco.com/its/service/oddce/services/DDCEServic
—address of the Cisco Smart Call Home Server.
Configures the destination email address or URL to which Cal
Home messages are sent.
When entering a destination URL, include either https:/
Note
or http://, depending on whether the server is a secure
server, or not.
Purpose
Enters global configuration mode.
Enables Cisco Smart Licensing and disables Cisco Software
Licensing (CSL).
Installing Cisco CSR 1000v Licenses