Registering The Router With The Cisco Licensing Cloud (Cssm Satellite) - Cisco CSR 1000v Series Software Configuration Manual

Registering the Router with the Cisco Licensing Cloud (CSSM satellite)

DETAILED STEPS
Command or Action
Step 1
license smart register idtoken id-token
Example:
Router# license smart register idtoken YjBkOWM5YTItMDFiOS00ZjBmLTllY2YtODEzMzg1
YTMyZDVhLTEzODE0MjE0%0ANzc5NDF8U1BDUTAySWFRTmJqa1NnbmlzRUIyaGlYU053L0pHZTNvUW9V
TFpE%0AekxCOD0%3D%0A
The system will now contact the Cisco Smart Licensing servers
to obtain authorization for Smart Licensing
The device is registered with Cisco.
Smart licensing may fail when IPv6 is configured on any interface and the device does not have IPv6
Note
connectivity to the Internet or the Cisco Smart Software Agent at tools.cisco.com, resulting in log file
error messages such as those shown below.
(Note that these messages may also appear as a result of other conditions being true.)
%SMART_LIC-3-AGENT_REG_FAILED: Smart Agent for Licensing Registration with Cisco licensing
cloud failed: Fail to send out Call Home HTTP message.
%SMART_LIC-3-COMM_FAILED: Communications failure with Cisco licensing cloud: Fail to
send out Call Home HTTP message.
If connectivity failed due to this issue, see
Server when IPv6 is Configured, on page
What to Do Next
Go to
Registering the Router with the Cisco Licensing Cloud (CSSM
satellite)
Note If you are registering the router and using CSSM satellite, go to the following section instead:
the Router with the Cisco Licensing Cloud, on page
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
176
Requesting Cisco Smart License Throughput Level Licenses, on page
Re-establishing Connectivity to the Cisco Smart Call Home
178.
175.
Installing Cisco CSR 1000v Licenses
Purpose
Registers the device instance
with the Cisco licensing
cloud. This step only needs to
be performed once per device
instance.
The license agent registers the
product with Cisco and
receives back an identity
certificate. This certificate is
saved and automatically used
for all future communications
with Cisco. The license agent
automatically renews the
registration information with
Cisco every 30 days.
180.
Registering