Cisco CSR 1000v Series Software Configuration Manual page 254

Subscribing to Alert Groups
SUMMARY STEPS
1. configure terminal
2. call-home
3. alert-group {all | configuration | environment | inventory | syslog | crash | snapshot}
4. profile name
5. subscribe-to-alert-group configuration[periodic {daily hh:mm | monthly date hh:mm | weekly day
hh:mm}]
6. subscribe-to-alert-group inventory [periodic {daily hh:mm | monthly date hh:mm | weekly day hh:mm}]
7. subscribe-to-alert-group syslog[severity {catastrophic | disaster |fatal | critical | major | minor |
warning |notification | normal | debugging}][pattern string]
8. subscribe-to-alert-group crash
9. subscribe-to-alert-group snapshot [periodic {daily hh:mm | hourly mm | interval mm | monthly date
hh:mm | weekly day hh:mm}]
10. end
DETAILED STEPS
Command or Action
Step 1 configure terminal
Example:
Router# configure terminal
Step 2
call-home
Example:
Router(config)# call-home
Step 3 alert-group {all | configuration | environment |
inventory | syslog | crash | snapshot}
Example:
Router(cfg-call-home)# alert-group all
Step 4 profile name
Example:
Router(cfg-call-home)# profile profile1
Step 5
subscribe-to-alert-group configuration[periodic
{daily hh:mm | monthly date hh:mm | weekly day
hh:mm}]
Example:
Router(cfg-call-home-profile)#
Cisco CSR 1000v Series Cloud Services Router Software Configuration Guide
242
Configuring Call Home for the Cisco CSR 1000v
Purpose
Enters global configuration mode.
Enters Call Home configuration submode.
Enables the specified alert group. Use the keyword all to enable
all alert groups. By default, all alert groups are enabled.
Enters Call Home destination profile configuration submode for
the specified destination profile.
Subscribes this destination profile to the Configuration alert group.
The Configuration alert group can be configured for periodic
notification, as described in Periodic Notification, on page 244.