Physical Processor Configuration - Hitachi Compute Blade 500 Series User Manual

Item
Legend:
Y: can be changed
-: cannot be changed
C: Can be changed with conditions
Notes:
1 Changeable in shared mode
.
How to assign a physical processor to a logical processor
Place the cursor on the intersection between the LPAR column and the logical
processor number row, and press [Enter] to display the sub-screen. Enter the
physical processor number, and press [Enter].
You can assign a physical processor to a logical processor, when the LPAR is
deactivated or activated in shared mode. If not setting the physical processor
number using this function, LPAR manager will assign a physical processor
when the LPAR is activated.
Note:
• The re-setting of this configuration is required when using this function
and changing the configuration that increases or decreases physical
processor (including the change of the hyper-thread setting enable/
disable). The condition and the reaction which require resetting of this
configuration are shown below.
Increase or decrease of
the Physical Processor

Physical Processor Configuration

The following functions are possible in the Physical Processor Configuration
screen.
Example of Physical Processor Configuration is below.
7-30
Hitachi Compute Blade 500 Series Logical partitioning manager User's Guide
LPAR Status
Activate
Condition
Setting will be initialized.
Re-set and save the configuration on the Logical Processor
Configuration screen when the re-setting of physical processor
number to logical processor is necessary.
LPAR manager allocates the physical processor automatically
when you do not re-set.
Operation by LPAR manager Screen
Deactivate Failure
Countermeasure Content
Supported
LPAR
Remark
manager
Version