Processor; Processor Mapping - Hitachi DS240 Service Manual

I H
NSTALLING THE ARDWARE

2.11 Processor

All the instructions and images in this section are for illustration purposes only and may
not reflect the actual product.
CAUTION!
!
E
NSURE ALL POWER IS DISCONNECTED FROM THE SYSTEM BEFORE PROCEEDING
Before attempting to service any component, make sure you are properly grounded and
wear ESD gloves to avoid damaging the components.
WARNING!
!
The use of ESD gloves is highly recommended when installing the processor and heat sink
assembly to prevent oxidation or inadvertently placing particulates on the LAND GRID ARRAY
(LGA).

Processor Mapping

The following illustration provides a reference for the system's CPU location.
CPU0
CPU Pin1 Indicator
CPU Pin1 Indicator
CPU1
Figure 2-40. Processor Mapping
P
ROCESSOR
.
CPU3
CPU Pin1 Indicator
CPU Pin1 Indicator
CPU2
2-34