Chapter 1 Product Overview
Back Panel
6
8
10
11
14
6
Router button
7
USB LED (Blue)
On:
Blinking:
Note: When this LED is blinking, the connected USB drive cannot be used. Remove the connected USB
drive. If the LED continues to blink even after the USB drive is removed, restart the AirStation. Do
not remove the USB drive or turn off the AirStation while the USB LED is on.
8
USB Eject button
9
USB Port
7
9
12
13
15
This button turns the router on and off. The operation mode is changed
by holding down the button.
The USB drive is connected.
The USB drive can be removed.
To dismount a USB hard drive, hold down this button until the USB LED
flashes (about 3 seconds). The USB drive can then be unplugged safely.
Connect the USB drive.
- 8 -