Buffalo WZR-D1800H User Manual page 15

Chapter 2 Installation
4
Turn on the AirStation, then wait one minute.
power outlet
5
If using a wired LAN, connect the AirStation LAN port and computer using a LAN cable.
If using a wireless LAN, connect the computer to the wireless LAN by referring to Chapter 4.
6
Once your computer has booted, the AirStation's LEDs should be lit as described below:
Wireless
Internet access
Router
Buffalo
LAN
Internet
For LED locations, refer to chapter 1.
Note: If the router LED is not lit, hold down the router button for about 3 seconds to switch to
router mode.
AirStation
Connect the power supply
AirStation
1) connect
On or blinking.
On.
On.
White light on.
Green light on or blinking.
Green light on or blinking.
Note : If the power does not turn on even when the AC
adapter is connected, press the Power button on
the rear of the AirStation.
2) connect
LAN cable
- 14 -
computer