Table of Contents
Advertisement
Chapter 3 Configuration
Parameter
Device
Disk Assignment
Partition Information
Re-recognize USB devices
Automatic USB Disk Assignment
FAT format file name character code
HDD power-saving function
HDD stop time
Meaning
Displays information for attached USB disks. Disks are removed
when [Remove] in the Device column is clicked.
A disk number will be automatically assigned to the disk or you can
choose a number. Select a disk number, or select [Do not assign],
then click [Apply].
Displays the partition information for the selected USB disk. Click
[Format] to format the disk. Note: formatting a disk will erase all
information on it.
Click this to re-scan for connected USB disks.
Check [Enable] to automatically select an attached USB hard disk.
The entire drive will be used as the shared folder. To configure your
disk and share manually, uncheck [Enable].
Select the character code for filenames in FAT formatted partitions.
Click [Enable] to enable power saving mode.
Powers down the drive after this duration of time.
- 56 -
Hide quick links:
Advertisement
Table of Contents
