Chapter 3 Configuration
Parameter
LAN Side IP Address
LAN Side Port
Port Forwarding Registration
Information
DMZ (Router Mode only)
Configure a destination to transfer communication packets without a LAN side destination to.
Parameter
IP Address of DMZ
Meaning
Enter the LAN side IP address (after translation) for the port
translation table entry.
Select the LAN side (after translation) port number (1 - 65535) for
the port translation table entry.
Shows current entries in the port translation table.
Meaning
Enter the IP address of the destination to which packets which are
not routed by a port translation table are forwarded.
Note: RIP protocol packets (UDP port number 520) will not be
forwarded.
- 52 -