Back Panel - Buffalo WZR-600DHP User Manual

Chapter 1 Product Overview

Back Panel

ROUTER
ON
OFF
AUTO
10
USB
EJECT
USB
LAN
1
13
15
INTERNET
POWER
12
USB Port
13
LAN Port
14
LAN LED (Green)
On:
Flashing:
9
Router Switch
Switches router mode between enabled, disabled, and auto.
On:
Off:
9
Auto:
11
12
10
USB Eject Button
To dismount a USB drive, hold down this button until the
2
14
USB LED flashes (about 3 seconds). The USB drive can then
3
be unplugged safely.
11
USB LED (Green)
4
On:
16
Off:
Note: When this LED is blinking, the connected USB drive
17
Connect the USB device.
Connect your computer, hub, or other Ethernet devices to these ports.
This switching hub supports 10 Mbps,100 Mbps, and 1000 Mbps
connections.
An Ethernet device is connected.
An Ethernet device is communicating.
Router functionality is enabled (router mode).
Router functionality is disabled (bridge/AP
mode).
This switches between modes automatically
based on whether or not another router is
detected on the Internet port. The default setting
for this switch is Auto.
The USB drive is connected.
No USB drive is connected.
cannot be used. Remove the connected USB drive. If
the LED continues to blink even after the USB drive is
removed, restart the AirStation.
Do not remove the USB drive or turn off the
AirStation while the USB LED is on.
- 8 -