Honeywell VISTA-128FBPN Installation And Setup Manual page 13

Program feature or option
3 60 BELL 2 & AUX
RELAY TIMEOUT
3 82 ENABLE
BURGLARY FEATURES
ON PARTITION 1
RESTRICTION FOR FIRE
RELAYS
NOTE: When there is a conflict between UL864 and CP-01, UL864 will take precedence.
SIA CP-01 Quick Reference Chart
The minimum required system for SIA CP-01 is a UL Listed Control, Keypad and Bell.
Item Feature
*09 Entry Delay # 1
*10 Exit Delay #1
*11 Entry Delay # 2
*12 Exit Delay #2
*28 Power Up in
Previous State
*57 Dynamic Signaling
Priority
*84 Swinger Suppression
*88 Abort Window Time
(for non-fire zones)
1*21 Exit Time Reset
1*22 – 1*25 Cross Zoning
1*42 Call Waiting Defeat
Possible settings
Permitted in
UL864? Y/N
Enter 01-15 multiplied by 2
Y
minutes.
00 = no timeout.
0 = disable
N
1 = enable
Yes
Y
No
Range
02 – 15 multiplied by 15
seconds
00 = 240 sec (4 minutes)
03 – 15 multiplied by 15
seconds
02 – 15 multiplied by 15
seconds
00 = 240 sec (4 minutes)
03 – 15 multiplied by 15
seconds
0 = no
1 = yes
0 = primary dialer
1 = Communicator as
first reporting destination
01= 1 alarm
02= 2 alarms
1 = 15 seconds
2 = 30 seconds
3 = 45 seconds
0=no
1=Resets Exit Delay to
programmed value after
zone is closed and then
faulted prior to end of exit
delay.
Zone 001 – 128
000, 000 = Disabled
0 = no
1 = yes
Settings permitted in UL 864
Must be set to "3" (Minimum
of 6 minutes).
Must be set to "0" (disable).
Restriction for # 70 must be
set to Yes when
programming fire relays.
Shipping SIA Requirement*
Default
30 Seconds` At least 30 Seconds **
60 Seconds 60 Seconds
30 Seconds At least 30 Seconds **
60 Seconds 60 Seconds
Yes Yes
0 (primary dialer) 0 (primary dialer)
1 alarm 1 alarm
30 Seconds At least 15 Seconds **
1 (Enabled) 1 (Enabled)
Disabled Enabled and two (or
more) zones programmed
Disabled (0) Enabled if user has call
waiting
xiii