Organize Pre-Mounted Cables - Cisco TelePresence MX800 Installation Manual

Installation guide for Cisco TelePresence MX800 Dual - Floor stand
13

Organize pre-mounted cables

Stretch out the cables in the channel on top of the monitors,
and place them as illustrated. Do not unplug any cables.
The camera module is connected in step 15 and the cables
are connected in steps 14, 16 and 17.
2 ×
78-100574-02A0 | 2016 JUNE | © 2016 Cisco Systems, Inc. All rights reserved.
Left
monitor
To the left of camera module
Power (step 16)
Ethernet (step 16)
Loudspeaker cables
4 - 5 (step 17)
On the right side of monitor
Power over Ethernet
(step 14)
Right
monitor
In center To the right of camera module
HDMI (step 16)
Loudspeaker cable 6
(step 17)
5 ×
HDMI (step 14)
USB, type B (step 14)
HDMI (step 16)
Loudspeaker cables
2 - 6 (step 17).
Cable 1 is not used
Page 18