Chapter 2 RF Gateway 1 Configuration Quick Start
Card Presence
The RF Gateway 1 chassis can be populated with up to six QAM line cards.
To Verify QAM Card
1
Navigate to the QAMS page.
2
In the tree menu, select the desired QAM card.
Result: The web view indicates the status of the QAM card.
Enabling QAM Port
The RF Gateway 1 QAM line cards have two ports, with four RF output carriers per
port. Outputs are enabled/disabled from the port level as well as from the
individual carrier level. A global setting for a port must first be enabled, then
individual carriers within the port can be independently muted or unmuted as
desired.
To Enable QAM Port
1
Navigate to the QAMS page.
2
In the tree menu, select the desired Card/RF Port.
Result: The RF Port Configuration window is displayed.
3
In the Port Control field, set the parameter to On.
4
Click Apply.
5
Click Save.
16
78-4025112-01 Rev H0