Table of Contents
Advertisement
9
Click Apply.
10 Click Save.
Advanced Settings
Advanced settings are useful for the following reasons:
restrict input sources
block PIDs
split streams, etc.
Notes:
The RF Gateway 1 default database includes a pre-configured video stream map for
the advanced settings. The default settings accept any source IP addresses, do not
block the PIDS, break MPTS streams into SPTS for dejittering, and do not ignore
UDP port.
The GUI can enable settings such as PCR PID Select, MPTS Dejitter and Blocked PID
(only for MPTS streams).
To Configure Advanced Settings
1
Navigate to the Maps page.
2
Expand the tree menu to select the desired QAM Channel.
78-4025112-01 Rev H0
Provisioning
89
Advertisement
Table of Contents
