NEC UNIVERGE SV8100 Features & Specifications Manual page 16

Issue 5.0
Related Features
Automatic Route Selection
PBX Compatibility
Speed Dial – System/Group/Station
Station Message Detail Recording
Guide to Feature Programming
Program
Number
14-01-11
15-07-01
20-06-01
20-13-20
21-01-14
21-04-01
1 - 6
Program Name
Basic Trunk Data Setup –
Account Code Required
Programmable Function Keys
Class of Service for Extensions
Class of Service Options
(Supplementary Service) –
Account Code/Toll Restriction
Operator Alert (Restricted
Operation Transfer)
System Options for Outgoing
Calls – Forced Account Code
Inter-digit Timer
Toll Restriction Class for
Extensions
Description/Comments
Enable (1) or disable (0) Account
Codes for each trunk.
Assign a function key as an
Account Code key (code 50). Use
this key instead of the dial pad to
*
enter the before and after the
Account Code.
Assign a Class of Service (1~15)
to an extension.
In an extension Class of Service,
turn On (1) or Off (0) the Operator
Alert when a forced account code
is incorrectly entered.
The system waits this time for a
user to enter a Forced Account
code.
Use this option to assign a Toll
Restriction Class (1~15) to an
extension.
Account Code – Forced/Verified/Unverified
UNIVERGE SV8100
Assigned Data
0 = Disable
1 = Enable
(default = 1)
Line Key 1~48
0~99 (Normal Function
Code 851 by default)
* *
00 ~ 99
(Appearance Function
Code) (Service Code
852 by default)
Day Night/Mode: 1~8
Class of Service of
Extensions (1~15)
Default:
Extension port 101 =
Class 15
All other extension port
= Class 1
0 = Off
1 = On
(default = 0 for COS
01~15)
0~64800 (seconds)
(default = 3 seconds)
Day/Night Mode
1~9 (9 = Power Failure
Mode)
1~15
(default = 2)