HUAWEI EGW2100
Web Configuration Guide
4.
Step 8 Configure the DNS.
1.
2.
3.
4.
Step 9 Save the configuration.
1.
2.
----End
Issue 01 (2010-02-20)
Figure 4-60 Configuring the processing mode for DHCP packets on the interface
Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
to complete the configuration.
Choose NetWork > DNS Config. The DNS Config page is displayed.
Click the Basic Configurations tab. Select the Enable DNS Proxy check box to enable
the DNS proxy function.
Figure 4-61 Enabling the DNS proxy
Click the DNS Server Address tab. Choose the interface Dialer0,
parameter setting.
Figure 4-62 Configuring the DNS server address
Click add. Then click OK in the Are you sure to submit? dialog box that is displayed to
complete the configuration.
Click Save on the upper right of the page to save the configuration.
parameter setting.
Figure 4-63 Saving the configuration
Click OK in the This will save current configuration, if you switch to other pages, you
will not get the operation result. Are you sure to save? dialog box that is displayed to
complete the configuration.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Configuration Example of the Internetworking
Figure 4-61
shows the parameter setting.
Figure 4-62
shows the
Figure 4-63
shows the
4-29