4 Configuration Example of the Internetworking
Figure 4-15 Networking of the ADSL configuration example
Procedure
Step 1 Configure an IP address for Ethernet 0/0/0 and add Ethernet 0/0/0 to the Trust zone.
For the configuration procedure, see
Step 2 Configure an IP address for Virtual-Ethernet 1 (VE 1) interface and add VE 1 to the Untrust
zone.
For the configuration procedure, see
Step 3 Configure the SHDSL interface.
1.
2.
3.
4.
4-8
Eth 0/0/0
10.1.1.1/24
Trust
Choose NetWork > Interface. The Interface page is displayed.
Click MORE corresponding to Atm2/0/0 to enter the Interface Basic Config interface.
Figure 4-16
shows the parameter setting.
Figure 4-16 Basic configuration of the SHDSL interface
Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
to complete the configuration.
Completing the operations on the EGW2100 takes a while (about 10 seconds). Wait with
patience. The progress bar at the bottom of the Web page shows the progress.
In the PVC Configuration group box, click New. The GSHDSL Port Configuration
interface is displayed.
Figure 4-17
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
ATM 2/0/0
VE 1
192.168.2.1/24
Untrust
DSLAM
EGW
3 Configuration Example of the Basic
3 Configuration Example of the Basic
shows the parameter setting.
HUAWEI EGW2100
Web Configuration Guide
BAS
192.168.2.2/24
Operation.
Operation.
Issue 01 (2010-02-20)