8.2 Configuration Example Of L2Tp Ipsec; Figure 8-9 Configuring The Static Route - Huawei EGW2100 Web Configuration Manual

8 Configuration Example of the VPN
10. Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
11. Choose Security > Packet-Filter. The Packet-Filter page is displayed.
12. Click MORE in the trust-untrust row. The Packet-Filter Config page is displayed. Select
13. Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
14. Click Save on the upper right of the page to save the configuration.
----End

8.2 Configuration Example of L2TP IPSec

Networking Requirements
The company headquarters access the Internet through the EGW2100. The VPN Client is
installed on the PC of the employees on business trip; the employee sends a connection request
to the EGW2100 and an L2TP+IPSec VPN tunnel is then established, through which the
employee can communicate with other internal users of the company.
Networking Diagram
Figure 8-10
8-6

Figure 8-9 Configuring the static route

to complete the configuration.
the permit option button respectively next to Inbound Default Packet-filter and
Outbound Default Packet-filter.
to complete the configuration.
NOTE
The default Packet-Filtering rule that allows all the packets to pass may cause security troubles.
Therefore, it is recommended to apply the ACL rule between security zones.
shows the networking diagram of L2TP IPSec.
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
HUAWEI EGW2100
Web Configuration Guide
Issue 01 (2010-02-20)