HUAWEI EGW2100
Web Configuration Guide
4.
5.
6.
7.
8.
Issue 01 (2010-02-20)
CAUTION
If the authentication is configured on the Dialer interface, the corresponding configuration
on the Cellular interface is also required.
Figure 4-50 Configuring the PPP user on the Cellular interface
Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
to complete the configuration.
Click back. Then return to the Cellular5/0/0 Interface Config interface.
In the Dial Control Center group box, click DCC Configuration. The DCC
Configuration interface is displayed.
Figure 4-51 Adding the Cellular interface to the Dialer circular group
Click Apply. Then click OK in the Are you sure to submit? dialog box that is displayed
to complete the configuration.
In the Data Card Config group box, click Data Card Config. Then click the Operator
Manage tab. The Operator Config interface is displayed.
parameter setting.
Figure 4-52 Configuring the operator
Huawei Proprietary and Confidential
Copyright © Huawei Technologies Co., Ltd.
4 Configuration Example of the Internetworking
Figure 4-51
shows the parameter setting.
Figure 4-52
shows the
4-25