Some Configurable Features For Operator Policies - Cisco ASR 5000 series Product Overview

Hide thumbs Also See for ASR 5000 series:

Table of Contents

▀ Features and Functionality - Basic

Figure 166. Logic Diagram for Policy Selection

IMSI in range of

Operator Policy?

Policy PLMN ID

matches selected or

service PLMN ID?

Apply configuration from

Operator Policy

Unique, non-overlapping, IMSI + PLMN-ID ranges create call filters that are used to distinguish between the configured

operator-policies. These filtering ranges are defined using the

Policy Configuration Mode‖ chapter of the Command Line Interface Reference

The system supports up to 1000 operator policies, including the operator policy named default. All operator policies

must be configured by the user to define limitations to be applied but for the default policy there is no

defined IMSI range filter to determine implementation - the default policy applies to any IMSIs that are not covered by

any other defined operator policy.

Some Configurable Features for Operator Policies

The following is a list of some of the features and functions that can be controlled via configuration of SGSN Operator

Operator Determined Barring (ODB) - similar in function to roaming restrictions, but applied on a per service

basis, such as SMS.

▄ Cisco ASR 5000 Series Product Overview

Policy PLMN ID

Default Operator

Policy Configured?

Apply configuration from

SGSN service

command documented in the ―SGSN Operator

Serving GPRS Support Node (SGSN) Overview

default Operator Policy