ASN Paging Controller and Location Registry Overview
Step
Description
16
The new anchor PC ASN sends an R4 LU_Cnf message with a successful LU indication to the current anchor PC ASN and
stops timer TR4_LU_Conf. The old current anchor PC ASN clears its LR context for the MS.
17
This step is optional. If the anchor PC ASN receives CMAC Key Count TLV update in LU_Cnf message, it should perform
an R4 CMAC Key Count Update procedure with the authenticator ASN to update it with the latest CMAC Key Count.
Refer to section 4.13 for the call flow.
Paging Operation
This section describes the paging operation for a WiMAX MS.
The following figure and table provides a high-level view of the steps involved in the paging operation call flow of an
MS.
OL-22938-02
Cisco ASR 5000 Series Product Overview ▄
Introduction ▀