Cisco ASR 5000 series Product Overview page 108

▀ ASR 5000 Line Cards
Module Type Card
Identification
10GBase- Ethernet 10G SR
SR
10GBase- Ethernet 10G LR
LR
Important:
for Class 1 laser devices for IEC825, EN60825, and 21CFR1040 specifications.
W
ARNING
radiation may be emitted from the aperture of the port when no cable is connected. Avoid exposure to laser radiation
and do not stare into open apertures. BE SURE TO KEEP COVER ON INTERFACE WHEN NOT IN USE.
Important:
The following shows the front panel of the XGLC, identifying its interfaces and major components:
▄ Cisco ASR 5000 Series Product Overview
Interface Type
Fiber, LC duplex female
connector
Fiber, LC duplex female
connector
Class 1 Laser Compliance Notice This product has been tested and found to comply with the limits
:
Only trained and qualified personnel should install, replace, or service this equipment. Invisible laser
Disposal of this product should be performed in accordance with all national laws and regulations.
Cable Specifications
Fiber Type: Multi-mode fiber (MMF), 850 nm
wavelength
Core Size (microns)/Range:
62.5/902.23 feet (275 meters)
50/1640.42 feet (500 meters)
62.5um/33m (OM1)
50um 500MHz-km/82m (OM2)
50um 2000MHz-km/300m (OM3)
Minimum Tx Power: -7.3 dBm
Rx Sensitivity: -11.1 dBm
Fiber Type: Single-mode fiber (SMF), 1310 nm
wavelength
Core Size (microns)/Range: 9/32808.4 feet (10
Kilometers)
Minimum Tx Power: -11.0 dBm
Rx Sensitivity: -19 dBm
ASR 5000 Hardware Platform Overview
OL-22938-02